TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 552 of 1176

TM 9-2320-361-24-1

0055 00

0055 00-2

TURBOCHARGER OIL INLET TUBE AND ADAPTER REPLACEMENT (Contd)

CAUTION

Cover or plug all hoses, connections, and openings immediately

after disconnecting or removing a component to prevent

contamination. Remove all plugs prior to component

installation.

REMOVAL

1.

Remove oil inlet tube (3) from elbow (5) and oil inlet adapter (8).

2.

Remove elbow (5) from engine (4).

3.

Remove two screws (1), lockwashers (2), oil inlet adapter (8), and gasket (7) from turbocharger (6)

Discard lockwashers (2) and gasket (7).

INSTALLATION

1.

Install new gasket (7) and oil inlet adapter (8) on turbocharger (6) with two new lockwashers (2)

and screws (1).

2.

Add 2 oz (59 ml) of new lubricating oil OE/HDO 30 into oil inlet adapter (8).

3.

Install elbow (5) on engine (4).

4.

Install oil inlet tube (3) on elbow (5) and oil inlet adapter (8).

5.

Connect battery ground cable (WP 0126 00).

6.

Lower and secure hood (TM 9-2320-361-10).

7.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).