TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 574 of 1176

TM 9-2320-361-24-1

0061 00

0061 00-4

FUEL PUMP (IN-TANK) MAINTENANCE (Contd)

DISASSEMBLY

1.

Remove lead seal (9) from stud (32) by cutting wire. Discard lead seal (9).

2.

Remove three nuts (5), lockwashers (4), and terminal cover (3) from plate and bracket (31).

3.

Remove screw (1) and disconnect pump wire (26) from terminal cover (3).

4.

Remove fuse (2) from terminal cover (3).

5.

Remove nut (6), lockwasher (7), fuel pump wire (26), wire retainer (25), and gasket (8) from plate

and bracket (31). Discard lockwasher (7) and gasket (8).

6.

Remove gasket (29) and recessed washer (28) from wire retainer (25). Discard gasket (29).

NOTE

Note location of mounting hardware on plate and bracket for

proper installation.

7.

Remove nut (14), washer (15), screw (13), and clamp (30) from wire retainer (25) and plate and

bracket (31).

8.

Remove pump (24) from clamp assembly (27).

9.

Remove two nuts (14), washers (15), screws (13), and clamp assembly (27) from plate and

bracket (31).

10.

Remove two nuts (22), screws (19), four lockwashers (20), and ground strap (21) from pump (24)

and clamp assembly (27). Discard lockwashers (20).

11.

Remove elbow (10) from plate and bracket (31).

12.

Remove hose assembly (18), nut (17), lockwasher (16), O-ring (12), and fitting (11) from plate and

bracket (31). Discard lockwasher (16) and O-ring (12).

13.

Remove clamp (23) and hose assembly (18) from pump (24).