TM-9-2320-361-24-1
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2
AUGUST 2006
TM-9-2320-361-24-1 - Page 58 of 1176
TM 9-2320-361-24-1
0002 00
0002 00-20
EQUIPMENT DESCRIPTION AND DATA (Contd)
EQUIPMENT DATA
Equipment performance data for M44A2 series vehicles is listed in table 2 below. This information
includes data applicable to field level maintenance only. For additional equipment data covering vehicle
dimensions, weights, performance, and permissible fuels, refer to TM 9-2320-361-10.
Table 2. Equipment Data.
STANDARD
METRIC
1. MAXIMUM PAYLOAD PER VEHICLE
M35A2, M35A2C, M36A2, M109A3, M185A3 .
...................................................
5,000 lb
2,268 kg
M49A2C .
.............................................................................................................
1,200 gal
4,542 L
M50A3.
................................................................................................................
1,000 gal
3,785 L
2. CAPACITIES
Cooling system .
.........................................................................................................
32 qt
30.3 L
Engine:
Crankcase only.
.....................................................................................................
20 qt
18.9 L
Crankcase and filter .
............................................................................................
22 qt
20.8 L
Differential (front or rear axles).
................................................................................
6 qt
5.7 L
Fuel Tank (all vehicles) .
.........................................................................................
50 gal
189.3 L
Transmission:
Without PTO .
.....................................................................................................
4.25 qt
4.0 L
With PTO.
...........................................................................................................
5.25 qt
4.9 L
Transfer Case (with or without PTO).
.......................................................................
7 qt
6.6 L
Front Winch:
Housing, clutch end.
................................................................................................
1 pt
0.47 L
Worm gear housing.
...........................................................................................
1.50 pt
0.71 L
3. ENGINE
Manufacturer:.
................................
Hercules Engines, Inc. or Continental Motors, Inc.
Model.
.........................................................................................................
LDT-465-1D
Type .
.............................
Turbocharged, six cylinder, in-line, liquid-cooled, multifuel
Weight.
...............................................................................................................
1,650 lb
748 kg
Idle speed (stamped on fuel pump ID plate).
...............................................
800–850 rpm
Operating speed (all models):
Full load (governed) .
..........................................................................
1,200–2,650 rpm
No load (governed) .
.............................................................................
1,200–2,900 rpm
Brake horsepower:
Gross (fan belts removed) .
.............................................................................
140 hp @
104 kW @
2,600 rpm
2,600 rpm
Net (fan belts installed) .
.................................................................................
130 hp @
96.98 kW @
2,600 rpm
2,600 rpm
Torque:
Gross .
.............................................................................................................
305 lb-ft @
414 N
•
m @
1,500 rpm
1,500 rpm
Net .
..................................................................................................................
297 lb-ft@
403 N
•
m @
1,500 rpm
1,500 rpm
Back to Top
