TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 628 of 1176

TM 9-2320-361-24-1

0070 00

0070 00-2

ACCELERATOR PEDAL, BRACKETS, AND ROD MAINTENANCE (Contd)

REMOVAL

1.

Remove throttle return spring (10) from swivel (9) and throttle return clip (1).

2.

Remove screw (3), washers (2), and throttle return clip (1) from steering gear housing (12).

3.

Remove cotter pin (4) and pin (11) from swivel (9) and disconnect swivel (9) from pump lever (13).

Discard cotter pin (4).

4.

Loosen screw (5) and remove connector (6), screw (5), and control wire (7) from flange on

accelerator rod (8).

5.

Remove locknut (19), ball joint (21), and accelerator rod (22) from lever (20). Discard locknut (19).

6.

Remove cotter pin (18), washer (17), and connecting link (16) from lever (20). Discard cotter

pin (18).

7.

Remove two cotter pins (14), pin (15), and lever (20) from bracket (24). Discard cotter pins (14).

NOTE

Assistant will help with step 8.

8.

Remove two locknuts (25), screws (26), and bracket (24) from cab floor (23). Discard locknuts (25).