TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 652 of 1176

TM 9-2320-361-24-1

0074 00

0074 00-2

EXHAUST SYSTEM REPLACEMENT (M50A3) (Contd)

REMOVAL

WARNING

Do not touch hot exhaust system components with bare hands.

Severe injury to personnel will result.

1.

Remove locknut (15), screw (9), and coupling (16) from flex tube (17) and elbow (11). Discard

locknut (15).

2.

Remove locknut (24), screw (22), coupling (23), flex tube (17), and gaskets (10) and (25) from

elbow (11) and Y-pipe (31). Discard locknut (24) and gaskets (10) and (25).

3.

Loosen clamp (13) and remove elbow (11), clamp (13), and gasket (12) from turbocharger (14).

Discard gasket (12).

4.

Remove locknut (43), screw (2), and exhaust stack shutoff (1) from exhaust pipe (3). Discard

locknut (43).

5.

Remove locknut (4), screw (40), clamp (41), exhaust pipe (3), and gasket (42) from Y-pipe (31).

Discard locknut (4) and gasket (42).

6.

Remove four locknuts (6), screws (39), two clamps (5), and exhaust shield (38) from Y-pipe (31).

Discard locknuts (6).

7.

Remove two nuts (8), lockwashers (18), U-bolt (37), and clamp (19) from Y-pipe (31) and

bracket (7). Discard lockwashers (18).

8.

Remove two locknuts (32), washers (33), screws (36), washers (35), and cover plates (20) from

fender (34). Discard locknuts (32).

9.

Remove locknut (21), washer (26), screw (30), washer (29), clamp (28), and Y-pipe (31) from bracket

(27). Discard locknut (21).