TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

  TM-9-2320-361-24-1 - Page 734 of 1176

TM 9-2320-361-24-1
0091 00
0091 00-14
FRONT WIRING HARNESS REPLACEMENT (Contd)
INSTALLATION (Contd)
NOTE
Steps 32 through 36 cover the left side front composite lights.
31.
Route wires (13), (14), and (19) through plate (15).
32.
Install grommet (16) in plate (15) and grommet (26) in fender (25).
33.
Connect wires (13), (14), and (19) to wires (12), (27), and (24).
34.
Install plate (15) on four screws (23) with four nuts (18).
35.
Install two clamps (20) on front wiring harness (17) and fender support (11) with two screws (21)
and nuts (22).
36.
Repeat steps 32 through 36 for right side front composite lights.
37.
Connect wire (9) to horn wire (10).
38.
Connect wire (8) to blackout lamp (28).
39.
Connect wires (3) and (5) to left headlamp (1).
40.
Remove slack from front wiring harness (17).
41.
Install clamp (6) on front wiring harness (17) and stud (29) with nut (7).
42.
Install wires (3), (5), and (8) on brush guard support (2) with new tiedown strap (4).
43.
Connect wires (62) to horn (42).
44.
Connect wires (37) to right headlamp (38).
45.
Repeat step 45 for left headlamp.
46.
Connect wire (60) to temperature sending unit (31).
47.
Connect wire (33) to preheater wire (32).
~
~
1
29
28
27
26
25
24
23
22
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
21
20


Back to Top