TM-9-2320-361-24-1

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 1 OF 2

AUGUST 2006

TM-9-2320-361-24-1 - Page 917 of 1176

TM 9-2320-361-24-1

0140 00

0140 00-5/6 blank

INTERMEDIATE PROPELLER SHAFT MAINTENANCE (M36A2) (Contd)

INSTALLATION

1.

Install frame support (4) to crossmember (6) with four screws (5) and new locknuts (3).

2.

Install flange yoke (25) on studs (1) of transfer flange (27) in parking brake drum (2) with four

new locknuts (26). Ensure scribed marks align. Tighten locknuts (26) 90–120 lb-ft (122–163 N

•

m).

3.

Install bearing housing (17) to frame support (4) with two screws (7), washers (15), and new

locknuts (16).

4.

Install deflector (12) and flange (11) on shaft (23) with washer (10) and nut (9).

5.

Tighten nut (9) on shaft (23) 260–290 lb-ft (353–393 N

•

m).

6.

Install new cotter pin (8) through nut (9).

7.

Ensure shaft (23) turns freely and with no side play at U-joint (24) and support bearing (19).

8.

Install forward-rear propeller shaft (WP 0139 00).

9.

Lubricate bearing housing (WP 0020 00).

10.

Connect battery ground cable (WP 0126 00).

11.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

END OF WORK PACKAGE

6

5

7

4

3

8

9

10

11

14

14

15

16

19

18

20

21

22

23

26

25

2

1

27

13

13

12

17

24

28