TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 1020 of 1144

TM 9-2320-361-24-2

0462 00

0462 00-2

VAN BODY MAINTENANCE (Contd)

REMOVAL

1.

Disconnect lead (7) from circuit breaker (2).

2.

Remove screw (5) from clamp (6).

3.

Remove screw (4) from bond assembly (3).

NOTE

• Perform step 4 if van body is equipped with heater.

• Have drainage container ready to catch fuel.

4.

Loosen nut (9) and disconnect fuel line (8) from elbow (1). Allow excess fuel to drain into container.

5.

Remove six locknuts (18) and screws (17) from six mounting brackets (16). Discard locknuts (18).

NOTE

Step 6 applies to M109A3 vehicles only.

6.

Remove four locknuts (10), screws (15), washers (14), and springs (13) and (12) from two mounting

brackets (11). Discard locknuts (10).

NOTE

Step 7 applies to M185A3 vehicles only.

7.

Remove four locknuts (19), screws (21), eight spring keepers (20), four springs (22), and

springs (23) from two mounting brackets (11). Discard locknuts (19).