TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 1102 of 1144
TM 9-2320-361-24-2
0471 00
0471 00-2
MANUFACTURED ITEMS LISTS (Contd)
FUEL LINE DUST CAP ASSEMBLY TOOL
1.
Fabricate from NSN 9510-00-224-1691, QQS634, carbon steel cylinder, 5.000 in. (127.000 mm) in
length and 0.90 in. (22.86) in diameter.
2.
The tolerance on all three decimal dimensions is + 0.005 in. (0.127 mm) and the tolerance on all
two place decimal dimensions is + 0.03 in. (0.76 mm).
3.
Trim steel to dimensions in diagram above.
4.
Drill one hole to dimensions in diagram above.
5.
Tool is used for installation of dust caps on fuel injector tubes.
1.000 IN.
(25.400 MM)
0.03 IN.
(0.76 MM)x 45°
0.840 IN.
(21.336 MM)
0.12 IN. (3.05 MM) DIA
0.250 IN. (6.350 MM)
0.40 IN. (10.16 MM) DIA
30°
(REF)
7° (REF)
4.500 IN. (114.300 MM)
1.620 IN. (41.148 MM)
0.840 IN.
(21.336 MM)
DIA
0.770 IN.
(19.558 MM) DIA
0.780 IN.
(19.812 MM)
Back to Top
