TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 206 of 1144

TM 9-2320-361-24-2

0242 00

0242 00-2

WINDSHIELD WIPER IDLER SHAFT AND HOUSING REPLACEMENT (Contd)

NOTE

The replacement procedure for the left and right idler shaft and

housing assembly is basically the same. This procedure covers

the left idler shaft and housing assembly.

REMOVAL

Remove two screws (4), locknuts (1), and idler shaft and housing assembly (2) from windshield

frame (5). Discard locknuts (1).

INSTALLATION

1.

Apply grease to surface of shaft (3).

2.

Install idler shaft and housing assembly (2) on windshield frame (5) with two screws (4) and new

locknuts (1).

3.

Install left and right conlinks (WP 0240 00).

4.

Install wiper blade and arm (WP 0243 00).

5.

Connect battery ground cable (WP 0126 00).

6.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

1

5

4

2

3

END OF WORK PACKAGE