TM-9-2320-361-24-2
2-1/2 TON, 6X6, M44A2 SERIES TRUCKS
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2
AUGUST 2006
TM-9-2320-361-24-2 - Page 250 of 1144
TM 9-2320-361-24-2
0257 00
0257 00-2
FRONT SPLASH GUARD REPLACEMENT (Contd)
NOTE
Left and right front splash guards are removed the same. This
procedure covers the left front splash guard.
REMOVAL
1.
Remove two locknuts (13) and screws (8) from splash guard braces (6) and front splash guard (14).
Discard locknuts (13).
2.
Remove two locknuts (4), screws (5), and splash guard braces (6) from frame (2). Discard locknuts (4).
NOTE
Perform step 3 only if pioneer tool kit is on vehicle.
3.
Remove two locknuts (15) and screws (7) from front splash guard (14) and pioneer tool kit
bracket (1). Discard locknuts (15).
4.
Remove two locknuts (3), screws (16), and splash guard (14) from frame (2). Discard locknuts (3).
NOTE
Perform step 5 for M35A2C series vehicles.
5.
Remove two locknuts (9), screws (12), plate (10), and bumper (11) from front splash guard (14).
Discard locknuts (9).
INSTALLATION
NOTE
Perform step 1 for M35A2C series vehicles.
1.
Install bumper (11) and plate (10) on front splash guard (14) with two screws (12) and new
locknuts (9).
2.
Install front splash guard (14) on frame (2) with two screws (16) and new locknuts (3).
NOTE
Perform step 3 only if pioneer tool kit is installed on vehicle.
3.
Install front splash guard (14) on pioneer tool kit bracket (1) with two screws (7) and new locknuts (15).
4.
Install two splash guard braces (6) on frame (2) with two screws (5) and new locknuts (4).
5.
Install two splash guard braces (6) on front splash guard (14) with screws (8) and new locknut (13).
6.
Release parking brake and remove wheel chocks (TM 9-2320-361-10).
Back to Top
