TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 278 of 1144

TM 9-2320-361-24-2

0264 00

0264 00-4

DISCHARGE VALVE CONTROL LEVERS MAINTENANCE (M49A2C) (Contd)

ASSEMBLY

1.

Install clevis (26) on lever arm (21) with pin (25) and new cotter pin (27).

2.

Install spacer bar (1) on brackets (5), (30), and (23) with three new lockwashers (3) and screws (2).

Do not tighten screws (2).

3.

Install lever shaft (8) through bracket (5), lever (4), bracket (30), lever (28), and bracket (23) with

three new lockwashers (7) and screws (6).

4.

Place lever arm (14) on bushing (29), lever arm (21) on bushing (24), roller (11) on bushing (10),

and roller (18) on bushing (29).

5.

Position cam (13) with tab down between lever arm (14) and roller (11). Install cam (13) by

inserting shaft (9) through bushing (10) and cam (13) and into bushing (29).

6.

Position cam (19) with tab down between lever arm (21) and roller (18). Install cam (19) by

inserting shaft (9) through bushing (29) and cam (19) and into bushing (24).

7.

Install setscrews (12) and (20) in cams (13) and (19).

8.

Install fusible link (17) on bracket (30) and lever arm (14) with new cotter pins (15) and (16).

9.

Install spring (31) on bracket (30) and lever arm (14).

10.

Install spring (22) on bracket (23) and lever arm (21).

11.

Tighten three screws (2).

1

2

3

4

5

6

7

9

10

11

28

29

30

31

24

25

26

27

8

12

13

14

15

16

18

17

20

19

21

22

23