TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 309 of 1144

TM 9-2320-361-24-2

0270 00

0270 00-1/2 blank

FIELD MAINTENANCE INSTRUCTIONS

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)

WATER TANK NOZZLE HOLDER REPLACEMENT

REMOVAL AND INSTALLATION

INITIAL SETUP:

Applicable Models

M50A3

Materials/Parts

Six locknuts (item 130, WP 0470 00)

Equipment Condition

Parking brake set and wheels chocked

(TM 9-2320-361-10).

Battery ground cable disconnected

(WP 0126 00).

REMOVAL

1.

Remove two locknuts (4), screws (2), and nozzle hanger (3) from tank body (1).

2.

Remove two locknuts (10), screws (13), and nozzle holder (12) from angle bracket (11). Discard

locknuts (10).

3.

Remove two locknuts (4), screws (9) and angle bracket (11) from tank body (1). Discard locknuts (4).

4.

Remove screw (7), washer (8) and strap (6) from tank body (1).

INSTALLATION

1.

Install strap (6) on tank body (1) with screw (7) and washer (8).

2.

Install angle bracket (11) on tank body (1) with two screws (9) and new locknuts (4).

3.

Install nozzle holder (12) on angle bracket (11) with two screws (13) and new locknuts (10).

4.

Install nozzle hanger (3) on tank body (1) with two screws (2) and new locknuts (4).

5.

Connect battery ground cable (WP 0126 00).

6.

Release parking brake and remove wheel chocks (TM 92320-361-10).

END OF WORK PACKAGE

6

7

10

9

11

12

13

8

2

3

1

5

4