TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 342 of 1144

TM 9-2320-361-24-2

0285 00

0285 00-2

SEPARATOR ELEMENT TEST VALVE, GAUGE, AND LINES MAINTENANCE (M49A2C) (Contd)

WARNING

Diesel fuel is flammable. Do not perform fuel system procedures

near open flames. Injury or death to personnel may result.

REMOVAL

1.

Remove two tubes (14), line (15), five adapters (3), and elbow (11) from filter separator (1) and

selector valve (9).

2.

Remove two locknuts (10), screws (6), instruction plate (7), and selector valve (9) from bracket (8).

Discard locknuts (10).

3.

Remove two locknuts (16), screws (5), and bracket (8) from shelf (2). Discard locknuts (16).

4.

Remove gauge (12) from elbow (13) and elbow (13) from selector valve (9).

INSPECTION

Clean and inspect fittings (4) for cracks or stripped threads. Replace fittings (4) if threads are cracked

or stripped.

INSTALLATION

NOTE

Male pipe threads must be wrapped with antiseize tape before

installation.

1.

Install elbow (13) on selector valve (9).

2.

Install gauge (12) on elbow (13).

3.

Install bracket (8) on shelf (2) with two screws (5) and new locknuts (16).

4.

Install selector valve (9) and instruction plate (7) on bracket (8) with two screws (6) and new

locknuts (10).

5.

Install elbow (11), five adapters (3), line (15), and two tubes (14) on filter separator (1) and selector

valve (9).

6.

Fill filter separator (TM 9-2320-361-10).

7.

Connect battery ground cable (WP 0126 00).

8.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).