TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 378 of 1144

TM 9-2320-361-24-2

0296 00

0296 00-2

TANK BODIES UPPER AND LOWER REAR SPLASH GUARD REPLACEMENT (Contd)

~

~

1

2

3

14

13

11

6

9

12

10

4

5

7

8

END OF WORK PACKAGE

WARNING

Diesel fuel is flammable. Do not perform fuel system procedures

near open flames. Injury or death to personnel may result.

LOWER SPLASH GUARD REMOVAL

Remove three locknuts (6), screws (8), retainer strip (9), and lower splash guard (10) from upper splash

guard (4). Discard locknuts (6).

UPPER SPLASH GUARD REMOVAL

1.

Remove two locknuts (7) and screws (12) from braces (11) and upper splash guard (4). Discard

locknuts (7).

2.

Remove two locknuts (13), screws (2), and braces (11) from crossmember (1). Discard locknuts (13).

3.

Remove three locknuts (5), screws (3), and upper splash guard (4) from crossmember (14). Discard

locknuts (5).

UPPER SPLASH GUARD INSTALLATION

1.

Install upper splash guard (4) on crossmember (14) with three screws (3) and new locknuts (5).

2.

Install two braces (11) on crossmember (1) with two screws (2) and new locknuts (13).

3.

Install two braces (11) on upper splash guard (4) with two screws (12) and new locknuts (7).

LOWER SPLASH GUARD INSTALLATION

1.

Install retainer strip (9) and lower splash guard (10) on upper splash guard (4) with three

screws (8) and new locknuts (6).

2.

Connect battery ground cable (WP 0126 00).

3.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).