TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 398 of 1144

TM 9-2320-361-24-2

0302 00

0302 00-2

DOME LAMP AND HOUSING REPLACEMENT (Contd)

REMOVAL

1.

Loosen screw (5) from dome light housing (12) and open dome light door (4).

NOTE

For 24V lamp replacement, push in lamp to unscrew.

2.

Remove lamp (10) from dome light housing (12).

3.

Remove screw (5), clip (6), washer (7), and lens (8) from dome light door (4).

4.

Remove gasket (9) from dome light housing (12). Discard gasket (9).

NOTE

• Hold dome light assembly up to keep weight off wires.

• Tag wires for installation.

5.

Remove four screws (11) and dome light housing (12) from ceiling (1).

6.

Remove two screws (3) and wires (2) from dome light housing (12).

INSTALLATION

1.

Install lens (8) on dome light door (4) with clip (6), washer (7), and screw (5).

2.

Apply adhesive to new gasket (9) and install on dome light housing (12).

3.

Install lamp (10) on dome light housing (12).

4.

Install two wires (2) on dome light housing (12) with two screws (3).

5.

Install dome light housing (12) on ceiling (1) with four screws (11).

6.

Close dome light door (4) and tighten screw (5).

7.

Connect battery ground cable (WP 0126 00).

8.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

END OF WORK PACKAGE

1

12

2

3

4

5

6

7

8

9

10

11

~