TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 412 of 1144

TM 9-2320-361-24-2

0307 00

0307 00-2

VAN BODY CEILING PANEL REPLACEMENT (Contd)

WARNING

Gloves, eyeshields, and dust mask must be worn during panel

removal and installation. Failure to do so may result in injury

to personnel.

NOTE

Ceiling panels on both sides of van ceiling are removed and

installed the same. This procedure covers the passenger side.

REMOVAL

1.

Remove twenty screws (5) and center ceiling panel (6) from two ceiling panels (1), ceiling panel (8),

and frame (2).

2.

Remove thirty-two screws (7), two ceiling panels (1), and ceiling panel (8) from frame (2).

INSTALLATION

1.

Position two ceiling panels (1) and ceiling panel (8) on frame (2) and align panel (1) screw holes (4)

with screw holes (3) in frame (2).

2.

Install two ceiling panels (1) and ceiling panel (8) with thirty-two screws (7).

3.

Install center ceiling panel (6) on frame (2), two ceiling panels (1), and ceiling panel (8) with

twenty screws (5).

4.

Install primary or secondary van body heaters (if removed) (WP 0384 00).

5.

Install 115-volt receptacle strip (WP 0312 00).

6.

Install multibreaker and safety switch boxes (WP 0317 00 and WP 0318 00).

7.

Install exhaust blower motor and bracket (WP 0301 00).

8.

Install front and side window sashes (WP 0320 00 and WP 0321 00).

9.

Install dome lights (WP 0302 00).

10.

Connect battery ground cable (WP 0126 00).

11.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).