TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 587 of 1144

TM 9-2320-361-24-2

0355 00

0355 00-1/2 blank

FIELD MAINTENANCE INSTRUCTIONS

FOR SPECIAL PURPOSE KITS

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS (MULTIFUEL)

EXHAUST TUBE REPLACEMENT

REMOVAL AND INSTALLATION

INITIAL SETUP:

Applicable Models

All

Tools and Special Tools

General mechanic’s tool kit

(item 116, WP 0469 00)

Materials/Parts

Cotter pin (item 17, WP 0470 00)

Locknut (item 145, WP 0470 00)

Equipment Condition

Parking brake set and wheels chocked

(TM 9-2320-361-10).

Battery ground cable disconnected

(WP 0126 00).

WARNING

Do not touch hot exhaust system components with bare hands.

Severe injury to personnel will result.

REMOVAL

1.

Remove cotter pin (2) and exhaust tube (7) from personnel heater elbow (1). Discard cotter pin (2).

2.

Remove two nuts (5), screws (3), clamps (4), and exhaust tube (7) from left front fender (6).

3.

Remove locknut (8), screw (10), clamp (9), and exhaust tube (7) from splash shield (11). Discard

locknut (8).

4.

Remove exhaust tube (7) from vehicle.

INSTALLATION

1.

Install exhaust tube (7) on personnel heater elbow (1) with new cotter pin (2) through elbow (1)

and tube (7).

2.

Install exhaust tube (7) on left front fender (6) with two clamps (4), screws (3), and nuts (5).

3.

Install exhaust tube (7) on splash shield (11) with clamp (9), screw (10), and new locknut (8).

4.

Connect battery ground cable (WP 0126 00).

5.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).

END OF WORK PACKAGE

1

2

11

10

9

8

7

6

5

4

3

3

4