TM-9-2320-361-24P

2 1/2-TON, 6X6, M44A2 SERIES TRUCKS

REPAIR PARTS AND SPECIAL TOOLS LIST FIELD AND SUSTAINMENT MAINTENANCE

AUGUST 2006
TM-9-2320-361-24P

  TM-9-2320-361-24P - Page 15 of 840

0001 00-3
TM 9-2320-361-24P
0001 00
Fourth Position.
The maintenance code entered in the fourth position tells you whether or not the item
is to be repaired and identifies the lowest maintenance level with the capability to do complete repair
(i.e., perform all authorized repair functions).
NOTE
Some limited repair may be done on the item at a lower level of
maintenance, if authorized by the Maintenance Allocation Chart
(MAC) and SMR codes.) This position will contain one of the
following maintenance codes.
Code
Application/Explanation
O
– Unit is the lowest level that can do complete repair of the item.
F
– Direct support is the lowest level that can do complete repair of the item.
H
– General support is the lowest level that can do complete repair of the item.
L
– Specialized repair activity (designate the specialized repair activity) is the
lowest level that can do complete repair of the item.
D
– Depot is the lowest level that can do complete repair of the item.
Z
– Nonrepairable. No repair is authorized.
B
– No repair is authorized. (No parts or special tools are authorized for the
maintenance of a B-coded item.) However, the item may be reconditioned
by adjusting, lubricating, etc., at the user level.
Recoverability Code.
Recoverability codes are assigned to items to indicate the disposition action on
unserviceable items. The recoverability code is entered in the fifth position of the SMR code as follows:
Recoverability
Code
Application/Explanation
Z
– Nonrepairable item. When unserviceable, condemn and dispose of the
item at the level of maintenance shown in 3rd position of SMR code.
O
– Reparable item. When uneconomically reparable, condemn and dispose of
the item at unit level.
F
– Reparable item. When uneconomically reparable, condemn and dispose of
the item at the direct support level.
H
– Reparable item. When uneconomically reparable, condemn and dispose of
the item at the general support level.
D
– Reparable item. When beyond lower level repair capability, return to depot.
Condemnation and disposal of item not authorized below depot level.
L
– Reparable item. Condemnation and disposal not authorized below
specialized repair activity (SRA).
A
– Item requires special handling or condemnation procedures because of
specific reasons (e.g.; precious metal content, high dollar value, critical
material, or hazardous material). Refer to appropriate manuals/directives
for specific instructions.
NSN (Column (3)).
The NSN for the item is listed in this column.
CAGEC (Column (4)).
The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code
is used to identify the manufacturer, distributor, or Government agency/activity, that supplies the item.
Part Number (Column (5)).
Indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the
item by means of its engineering drawings, specifications standards, and inspection requirements to
identify an item or range of items. Part numbers not available (N/A) will be provided as updates to this
manual when available.


Back to Top