TM-9-2320-361-34P
TRUCK, 2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 1993
TM-9-2320-361-34P - Page 12 of 1435
TM 9-2320-361-34P
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
(INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
SECTION I. INTRODUCTION
1.
Scope.
This Repair Parts and Special Tools List (RPSTL) lists and authorizes spares and repair parts, special
tools, special Test, Measurement, and Diagnostic Equipment (TMDE); and other special support equipment
required for performance of direct support and general support maintenance of the 2-1/2-ton, 6x6, M44A1
and M44A2 series vehicles. It authorizes the requisitioning, issue, and disposition of spares, repair parts,
and special tools as indicated by the Source, Maintenance, and Recoverability (SMR) codes.
2.
General.
In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following
sections:
a. Section II Repair Parts
List. A list of spares and repair parts authorized by this RPSTL for
use in the performance of maintenance. The list also includes parts which must be removed for replacement
of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence,
with the parts in each group listed in ascending figure and item number sequence. Bulk materials are
listed in item name sequence. Repair parts kits are listed separately in their own functional group within
Section II. Repair parts for reparable special tools are also listed in this section. Items listed are shown on
the associated illustration(s)/figure(s).
b. Section III Special Tool List.
A list of special tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION
AND USABLE ON CODE column) for the performance of maintenance.
c. Section IV Cross-Reference Index.
A list, in National Item Identification Number (NIIN)
sequence, of all National Stock Numbered (NSN) items appearing in the listing, followed by a list in alpha-
numeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers
are cross-referenced to each illustration figure and item number appearance. The Figure and Item Number
Index lists figure and item numbers in alphanumeric sequence and cross-references NSN, Commercial and
Government Entity Code (CAGEC), and part numbers.
3.
Explanation of Columns (Sections II and III).
a. Item No. (Column (l)).
Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2)).
The Source, Maintenance, and Recoverability (SMR) code is a 5-position
code containing supply/requisitioning information, maintenance category authorization criteria, and
disposition instructions, as shown in the following breakout:
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance
tasks of the “Repair” function in a use/user environment in order to restore serviceability to a failed item.
1
Back to Top
