TM 9-2320-365-10
2-36
Change 2
Table 2-1.
Preventive Maintenance Checks and Services (All Models) (Cont)
Location
Item
No.
Interval
Item to
Check/
Service
Crewmember
Procedure
Not Fully
Mission Capable
If:
WARNING
•
Extreme care should be taken when removing coolant fill
cap if temperature gage reads above 180
F (82 C). Contact
with steam or hot coolant under pressure may result in
injury to personnel.
•
Pressure in radiator overflow tank must be released before
removing cap.
Failure to comply may result in injury to
personnel.
•
Do not operate vehicle if radiator cap is damaged or
missing. Failure to comply will result in injury or damage to
equipment.
3
Before
Coolant
a.
Check coolant level.
Coolant level should be
between upper sight-
glass and lower sight-
glass on radiator
overflow tank with
engine not running.
Add
coolant as required
(Appendix F, Note 4).
a.
Coolant level
below lower
sightglass.