TM-9-2320-365-10

M1078 SERIES, 2-1/2 TON, 4x4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

OPERATOR'S INSTRUCTIONS MANUAL

AUGUST 2005

CHANGE 2

TM-9-2320-365-10 - Page 297 of 836

TM 9-2320-365-10

WARNING

WARNING

Ensure there are at least two wraps of cable on hoist drum at all times.

Cable could come off hoist drum while load is being lifted.

Failure to

comply may result in injury to personnel or damage to equipment.

CAUTION

• If circuit breaker trips while Light Material Handling Crane (LMHC) is operating,

allow 30 minutes to cool down. If load is suspended, reset circuit breaker and lower

load. If circuit breaker trips again, notify Unit Maintenance. Failure to comply may

result in damage to equipment.

• Do not jerk hoist control switch causing load to bounce. Failure to comply may

result in damage to equipment.

(4) Place hoist control switch (2) in down position to reel in cable (3) and lift load.

(5) Swing boom (1) to place load in desired location (para 2-24h).

(6) Place hoist control switch (2) in up position to lower load.

(7) Remove hook (4) from load.

2-197