TM-9-2320-365-10

M1078 SERIES, 2-1/2 TON, 4x4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

OPERATOR'S INSTRUCTIONS MANUAL

AUGUST 2005

CHANGE 2

TM-9-2320-365-10 - Page 455 of 836

TM 9-2320-365-10

Change 2

2-320.1/(2-320.2 Blank)

b.Preparation of Disabled Vehicle (M1078 Series).

•

Both drive shafts must be removed when flat towing an M1078 series vehicle

over 100 miles (161km) or if towing speed is over 35 MPH.

Failure to comply

may result in damage to equipment.

•

Front drive shaft must be removed prior to performing a rear connection lift

and tow

Failure to comply may result in damage to equipment.

•

Rear drive shaft must be removed prior to performing a front connection lift

and tow.

Failure to comply may result in damage to equipment.

NOTE

Disabled vehicles must be prepared and moved in accordance with FM

20-22 and FM 21-305.

(1) Notify Unit Maintenance to remove drive shaft(s) as required.

(1.1) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2).

(2) Push in SYSTEM PARK control (3).

(3) Position hazard lights switch (4) to on.

CAUTION