TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
2-883
2-883
2-883
2-883
2-883
CONTINUITY TEST
(1)
Disconnect connector P6 from horn.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
connector P6.
(4)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(5)
If continuity is not present, repair wire 3035
(para 2-40) or replace front lights cable
assembly (para 7-74).
(6)
If continuity is present, replace horn
(para 7-44).
(7)
Connect connector P6 to horn.
(8)
Position front grille on cab with washer and
screw.
(9)
Position two washers and screws in front
grille.
(10)
Tighten screw to 48-60 lb-in. (5-7 N·m).
(11)
Tighten two screws to 24 lb-in. (3 N·m).