TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
2-1079
2-1079
2-1079
2-1079
2-1079
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
connector P80-1.
(3)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4)
If continuity is not present, repair wire 3009
(para 2-40) or replace start and charging
cable assembly (para 7-82).
(5)
If continuity is present, replace or repair
air dryer (para 23-6).
(6)
Connect connector P80 to air dryer connector.