TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 411 of 1760

CONTINUITY TEST

(1)

Remove circuit breaker CB36 from PDP.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter

to relay K2 socket 87 on PDP.

(4)

Connect negative (-) probe of multimeter to

circuit breaker CB36 socket 6 on PDP and

note reading on multimeter.

(5)

If continuity is not present, repair wire

1604 from relay K2 socket 87 on PDP to

bus bar X6 on PDP (para 2-40) or replace

WTEC II dashboard cable assembly (para

7-10) or WTEC III dashboard cable

assembly (para 7-11).

(6)

If continuity is present, replace bus bar X6

on PDP or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(7)

Install circuit breaker CB36 in PDP.

(8)

Install relay K2 in PDP.

(9)

Install power distribution panel (PDP) cover

(para 16-2).

(10)

Connect batteries (para 7-48).

Change 1

2-274.1

TM 9-2320-365-20-1