TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 497 of 1760

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector PX6 pin 4.

(3)

Connect negative (-) probe of multimeter to

known good ground and note reading on

multimeter.

(4)

If continuity is not present, repair wire 36 from

connector P31 socket 11 to connector P32

socket 2 (para 2-40) or engine control cable

assembly (para 7-72).

(5)

If continuity is present, repair wire 36 from

connector J31 pin 11 to connector PX6 pin 4

(para 2-40) or replace WTEC II dashboard cable

assembly (para 7-10) or WTEC III dashboard

cable assembly (para 7-11).

(6)

Connect connector J31 to connector P31.

(7)

Connect connector PX6 to engine OIL PRESS

gage connector.

(8)

Connect connector clamp to engine OIL PRESS

gage connector.

(9)

Install instrument panel assembly (para 7-15).

TM 9-2320-365-20-1

Change 2

2-331