TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 959 of 1760

CONTINUITY TEST

(1)

Remove two screws, lockwashers, RH

composite taillight assembly, and

terminal lug TL21 from right taillight

carrier.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL21.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3095

from terminal lug TL21 to terminal lug TL92

(para 2-40) or replace rear lights cable

assembly (para 7-75).

(6)

If continuity is present, replace RH

composite taillight assembly (para 7-32).

(7)

Install terminal lug TL21, and RH composite

taillight assembly on right taillight carrier with

two lockwashers and screws.

Change 1

2-593

TM 9-2320-365-20-1

(8)

Connect connector P64 to RH composite

taillight assembly.

(9)

Install RH composite taillight lamp in socket.

(10)

Install preformed packing and cover on RH

composite taillight assembly with six screws.