TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-1157
2-1157
2-1157
2-1157
2-1157
CONTINUITY TEST
(1)
Remove six screws and cover from 110/208
VAC POWER DISTRIBUTION PANEL.
(2)
Loosen screw in terminal board TB4.
(3)
Remove wire 1499G from terminal board TB4.
(4)
Set multimeter to ohms.
(5)
Connect positive (+) probe of multimeter to
wire 1499G.
(6)
Connect negative (-) probe of multimeter to
neutral socket of 110 vac receptacle J233 and
note reading on multimeter.
(7)
If continuity is not present, repair or replace
wire 1499G (para 2-40).