TM-9-2320-365-20-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-2 - Page 1127 of 1432
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-2099
2-2099
2-2099
2-2099
2-2099
CONTINUITY TEST
CONTINUITY TEST
(1)
Remove 18 screws and cover from base plate.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
power harness connector pin A.
(4)
Connect negative (-) probe of multimeter to
top post of out solenoid and note reading on
multimeter.
(5)
If continuity is not present, replace power
harness (para 20-70).
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
top right post of out solenoid.
(3)
Connect negative (-) probe of multimeter to
bottom right post of out solenoid and note
reading on multimeter.
(4)
If continuity is not present, replace out
solenoid (para 20-70).
Back to Top
