TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-1303
2-1303
2-1303
2-1303
2-1303
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
J237 ground (G) binding post.
(3)
Connect negative (-) probe of multimeter to
J236 ground (G) binding post and note
reading on multimeter.
(4)
If continuity is not present, repair or replace
wire 3085AD (para 2-40).
(5)
If continuity is present, replace J236 24 vdc
ground binding post (para 16-52).