TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-2 - Page 459 of 1432

CAUTION

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.

NOTE

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

CONTINUITY TEST

TM 9-2320-365-20-2

Change 1

2-1482.29

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector J116 socket E1.

(3)

Connect negative (-) probe of multimeter to

connector J116 socket E2 and note reading

on multimeter.

(4)

If continuity is not present, go to step

14 of this fault.