(1)
Loosen air hose 120 at inversion valve
control port 90-degree fitting delivery port.
(2)
Start engine (TM 9-2320-365-10).
(3)
Apply service brakes (TM 9-2320-365-10).
(4)
Check for presence of air at inversion valve
control port 90-degree fitting delivery port.
(5)
Shut down engine (TM 9-2320-365-10).
(6)
If air is not present, go to step 18 of this
fault.
(7)
If air is present, replace air hose 120
(para 11-19).
(8)
Tighten air hose 120 at inversion valve
control port 90-degree fitting delivery port.
Change 1
2-1742.29
TM 9-2320-365-20-2