TM-9-2320-365-20-3
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-3 - Page 101 of 1268
TM 9-2320-365-20-3
4-12. GOVERNOR LINKAGE REPLACEMENT
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Pin, Cotter (Item 202, Appendix G)
Spacer, Ring (Item 260, Appendix G)
a. Removal.
(1) Remove cotter pin (1), washer (2), and TPS cable
assembly (3) from stud (4). Discard cotter pin.
(2) Remove clip (5) and throttle control cable (6) from stud
(7).
NOTE
Note position of two springs prior to removal.
(3) Remove springs (8 and 9) from linkage plate (10).
(4) Remove bolt (11), washer (12), and linkage plate (10)
from governor (13).
(5) Remove bolt (14), washer (15), and sensor bracket (16)
from governor (13).
Change 1
4-69
Back to Top
