TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 230 of 1268

TM 9-2320-365-20-3

6-13. DRIVE BELT AND TENSION PULLEY REPLACEMENT (CONT)

b. Installation.

(1) Install drive belt (1) on pulley damper (2) and water

pump pulley (3).

(2) Position tension pulley (4) on engine (5) with two

washers (6) and screws (7).

NOTE

Use square hole in drive belt/tension pulley to

apply and maintain tension on drive belt while

adjusting belt tension.

(3) Adjust water pump drive belt with drive belt/tension

pulley (4) as follows:

(a) New belt (less than 30 minutes running time) 115-

125 lb (512-556 N).

(b) Used belt 80-100 lb (356-444 N).

(4) Tighten two screws (7) to 35 lb-ft (47 N m).

6-72