TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 362 of 1268

TM 9-2320-365-20-3

7-22. COOLANT TEMPERATURE LIGHT SWITCH REPLACEMENT (CONT)

NOTE

Remove plastic cable ties as required.

(5) Disconnect

connector

clamp

(4)

from

coolant

temperature light switch (5).

(6) Disconnect connector P37 (6) from coolant temperature

light switch (5).

(7) Remove coolant temperature light switch (5) from

thermostat housing (7).

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(1) Apply

antiseize

compound

to

threads

of

coolant

temperature light switch (1).

(2) Position

coolant

temperature

light

switch

(1)

in

thermostat housing (2).

(3) Tighten coolant temperature light switch (1) to 20-23 lb-ft

(27-31 N·m).

(4) Connect connector P37 (3) to coolant temperature light

switch (1).

NOTE

Install plastic cable ties as required.

(5) Connect connector clamp (4) on coolant temperature

light switch (1).

7-120