TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-365-20-3 - Page 391 of 1268

TM 9-2320-365-20-3
7-32. COMPOSITE TAILLIGHT ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (2) (Item 92, Appendix G)
Packing, Preformed (Item 170, Appendix G)
Nut, Self-Locking (Item 116, Appendix G)
NOTE
• Tag
wires
and
connection
points
prior
to
disconnecting.
• Remove plastic cable ties as required.
• Right side connectors are P61, P62, P63, P64,
22-460, 24, 23, 21, and TL 21.
a. Removal.
NOTE
Left
and
right
composite
taillights
are
removed the same way. Left side shown.
(1) Remove self-locking nut (1), screw (2), and clamp (3)
from taillight carrier (4). Discard self-locking nut.
(2) Disconnect connectors P74, P76, P77, P78 (5) from
composite taillight connectors 22-461, 24, 23, 21 (6).
(3) Remove two screws (7), lockwashers (8), terminal lugs
TL18 and TL16 (9), and composite taillight assembly (10)
from taillight carrier (4). Discard lockwashers.
Change 1
7-149


Back to Top