TM 9-2320-365-20-3
Change 2
7-163
b. Installation.
(1)
Install preformed packing (1) on air pressure
transmitter (2).
(2)
Install air pressure transmitter (2) in reducer (3).
(3)
Install terminal lug TL157 (4) on air pressure
transmitter terminal WK (5) with lockwasher (6)
and nut (7).
(4)
Install terminal lug TL151 (8) on air pressure
transmitter terminal G (9) with lockwasher (10) and
nut (11).
c. Follow-On Maintenance.
(1)
Connect batteries (para 7-48).
(2)
Start engine (TM 9-2320-365-10).
(3)
Check FRONT BRAKE AIR and REAR BRAKE
AIR pressure gage operation (TM 9-2320-365-
10).
(4)
Shut down engine (TM 9-2320-365-10).
End of Task.
NOTE
•
Front brake air pressure transmitter and rear
brake air pressure transmitter are installed the
same way.
Rear brake air pressure transmitter
shown.
•
Terminal lugs on front brake air pressure
transmitter are TL150 for terminal G and TL156
for terminal WK.