TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 463 of 1268

TM 9-2320-365-20-3

7-53. CENTRAL TIRE INFLATION SYSTEM (CTIS) CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-48).

Kick panel removed (para 16-3).

Personnel heater removed (para 18-9).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 76, Appendix D)

a. Removal.

NOTE

• Note routing of CTIS cable assembly prior to

removal.

• Remove plastic cable ties as required.

(1) Disconnect connector P111 (1) from connector J111 (2).

(2) Disconnect connector P112 (3) from manifold valve

assembly (4).

(3) Disconnect connector P113 (5) from pressure transducer

(6).

(4) Remove CTIS cable assembly (7) from vehicle.

b. Installation.

NOTE

Install plastic cable ties as required.

(1) Position CTIS cable assembly (7) in vehicle.

(2) Connect connector P113 (5) to pressure transducer (6).

(3) Connect connector P112 (3) to manifold valve assembly

(4).

(4) Connect connector P111 (1) to connector J111 (2).

7-217