TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 500 of 1268

TM 9-2320-365-20-3

7-254

Change 2

7-63.

NATO POWER CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Battery box cover removed (TM 9-2320-365-10).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Apron, Rubber (Item 3, Appendix C)

Tool Kit, Genl Mech (Item 44, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

21, Appendix D)

Nut, Self-Locking (4) (Item 142, Appendix G)

Lockwasher (Item 78, Appendix G)

Grease, Automotive and Artillery (GAA) (Item 23,

Appendix D)

a. Removal.

(1)

Remove nut (1) and lockwasher (2) from battery

ground cable (3).

Discard lockwasher.

(2)

Deleted.

(3)

Remove terminal lugs TL50A (5), TL48 (6), and

battery tester terminal lug (7) from battery ground

cable (3).

WARNING

NOTE

Tag battery terminals, terminal lugs, and

connection points prior to disconnecting.

•

Remove rings, bracelets, watches, necklaces, and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and cause injury or short across electrical circuit

and cause severs burns or electrical shock.

Batteries can explode from a spark.

Battery

acid is harmful to skin and eyes.

Always wear eye protection when working with batteries.

•

Negative battery terminals and battery tester negative terminal lug must be disconnected

first.

Failure to comply may result in serious injury or death to personnel.