TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 759 of 1268

TM 9-2320-365-20-3

c. Installation.

(1) Turn two adjusting screws (1) in plunger housing (2)

until they bottom.

(2) Apply a film of grease to slots (3) in two adjusting

screws (1), anchor plungers (4) and to inside of two

holddown clips (5).

CAUTION

• Do not rely on automatic adjusters to take up

excessive

initial

clearance.

Tightening

adjusting screws against plunger housings

may result in failure of automatic adjusters to

function properly.

Failure to comply may

result in damage to equipment.

• Brake shoe ends stamped ADJUSTER are

positioned on adjusting screws.

Failure to

comply may result in damage to equipment.

(3) Loosen two adjusting screws (1) 1/2 turn or until slots

(3) are aligned with brake shoes (6).

(4) Install two brake shoes (6) in holddown clips (5) with

ends seated in slots in adjusting screws (1) and anchor

plungers (4).

(5) Install two return springs (7) on brake shoes (6).

11-5