TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 808 of 1268

TM 9-2320-365-20-3

11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT

(CONT)

b. Load Sensing Valve Control Cable Installation.

WARNING

Adhesive

Sealant

MIL-S-46163

can

damage

your

eyes.

Wear

safety

goggles when using; avoid contact

with eyes.

If sealant contacts eyes,

flush

eyes

with

water

and

get

immediate medical attention.

Failure

to comply may result in injury to

personnel.

(1) Apply adhesive to threads of screw (1).

(2) Position load sensing valve control cable (2) on bracket

(3) with screw (1).

(3) Tighten screw (1) to 35-43 lb-ft (48-58 N·m).

CAUTION

Load sensing valve control cable must be

installed in cable clamp on back side of

control lever, opposite cable clamp screw.

Failure to comply may result in damage to

load sensing valve control cable.

(4) Install load sensing valve control cable (2) in cable

clamp (4).

(5) Perform load sensing valve adjustment.

11-54