TM 9-2320-365-20-3
(4) Remove two self-locking nuts (7), screws (9), washers
(10), and inversion valve (11) from panel (12). Discard
self-locking nuts.
NOTE
Note
orientation
of
fittings
prior
to
removal.
(5) Remove run tee fitting (6) from inversion valve (11).
(6) Remove two 90-degree fittings (4) from inversion valve
(11).
(7) Remove branch tee fitting (2) from inversion valve (11).
Change 1
11-67