TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 891 of 1268

TM 9-2320-365-20-3

11-25. STOPLIGHT SWITCH REPLACEMENT

This task covers:

a. Removal

b. Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Air tanks drained (TM 9-2320-365-10).

Batteries disconnected (para 7-48).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Materials/Parts

Antiseize Compound (Item 63, Appendix D)

Dispenser, Pressure Sensitive Adhesive Tape

(Item 21, Appendix D)

Lockwasher (2) (Item 90, Appendix G)

a. Removal.

NOTE

• Both stoplight switches are removed the same

way. Rear stoplight switch shown.

• Tag wires and connection points prior to

removal.

• Terminal lugs on front stoplight switch are

TL154 and TL155.

(1) Remove two nuts (1), lockwashers (2), and terminal

lugs TL152 (3) and TL153 (4) from stoplight switch (5).

Discard lockwashers.

(2) Remove stoplight switch (5) from fitting (6).

Change 1

11-129