TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 926 of 1268

TM 9-2320-365-20-3

12-14

Change 2

12-5.

CENTRAL TIRE INFLATION SYSTEM (CTIS) HOSE ASSEMBLIES, MANIFOLD

VALVE, KNEELING VALVE AND BRACKET REPLACEMENT (CONT)

NOTE

(19) Position CTIS hose (17) on hollow wheel stud (18)

with two seals (19) and banjo bolt (20).

NOTE

(20) Tighten banjo bolt (20) to 22-28 lb-ft (30-38 N

•

m).

NOTE

(21) Position two seals (19), screw (21), and nut (22) on

CTIS hose (17).

(22) Tighten nut (22) to 22-28 lb-ft (30-38 N

•

m).

(23) Install valve core (23) in CTIS manifold valve (12).

(24) Install valve cap (24) on CTIS manifold valve (12).

c.

Follow-On Maintenance.

(1)

Install rim cover, if equipped (Para 12-10).

(2)

Start engine (TM 9-2320-365-10-1) and allow time for

CTIS to inflate tire.

(3) Shut down engine (TM 9-2320-365-10-1).

(4) Check for air leaks around CTIS hoses, CTIS

manifold valve assembly, and kneeling valve or hose

adapter.

End of Task.

Perform steps (21) and (22) if wheel will be

installed in spare tire retainer.

Place a screwdriver behind CTIS hose

assembly while tightening banjo bolt to keep

CTIS hose assembly from contacting wheel

studs.

Perform steps (19) and (20) if wheel is

mounted on vehicle.