TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 990 of 1268

TM 9-2320-365-20-3

14-2. FRONT BUMPER REPLACEMENT (CONT)

b. Installation.

(1) Position two side markers (1) on front bumper (2) with

four screws (3) and self-locking nuts (4).

(2) Tighten four self-locking nuts (4) to 18-22 lb-in. (2 N·m).

(3) Position intervehicular 12 vdc (7 pin) cable (5) on front

bumper (2) with two screws (6), lockwashers (7), and

self-locking nuts (8).

(4) Tighten two self-locking nuts (8) to 31-36 lb-in. (4 N·m).

WARNING

Front bumper weighs approximately 100

lbs (45 kgs). Use the aid of an assistant

to install front bumper. Failure to comply

may result in injury to personnel.

NOTE

Steps (5) and (6) require the aid of an

assistant.

(5) Install front bumper (2) on vehicle.

(6) Install two shackles (9) on supports (10) with pins (11).

(7) Install eight screws (12) on front bumper (2).

(8) Connect connector P52F (13) to connector J52 (14).

14-4

Change 1