TM-9-2320-365-20-4

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-4 - Page 148 of 968

TM 9-2320-365-20-4

16-12. CAB FLOOR COVERING AND DOOR SEAL REPLACEMENT (CONT)

c. Left Cab Floor Covering Removal.

(1) Remove

two

screws

(1)

and

washers

(2)

from

accelerator pedal (3).

(2) Position accelerator pedal (3) to allow removal of left

floor covering (4).

(3) Remove left floor covering (4) from cab floor (5).

(4) Remove four screws (6), washers (7), and molding (8)

from cab floor (5).

d. Left Cab Floor Covering Installation.

(1) Position molding (8) on cab floor (5) with four washers

(7) and screws (6).

(2) Tighten four screws (6) to 22-26 lb-in. (2-3 N·m).

(3) Install left floor covering (4) on cab floor (5).

(4) Install two washers (2) and screws (1) in accelerator

pedal (3).

(5) Tighten two screws (1) to 72-84 lb-in. (8-9 N·m).

e. Center Cab Floor Covering Removal.

Remove center floor covering (1) from cab floor (2).

f.

Center Cab Floor Covering Installation.

Install center floor covering (1) on cab floor (2).

16-102