TM-9-2320-365-20-4

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-365-20-4 - Page 306 of 968

TM 9-2320-365-20-4
16-43. M1079 VAN BODY FLOOR TAPPING PLATE INITIAL INSTALLATION (SERIAL
NUMBERS 001 THROUGH 190) (CONT)
NOTE
Steps (24) and (25) require the aid of an
assistant.
(24) Remove tapping plates (22 and 23) from van body floor
(2).
(25) Remove tapping plates (20 and 21) from van body floor
(2).
WARNING
Wear appropriate eye protection when
drilling holes.
Failure to comply may
result in injury to personnel.
(26) Drill pilot holes at locations marked in steps (20) and
(22).
(27) Enlarge pilot holes to 1/2 in. (1.27 cm).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to
comply
may
result
in
injury
to
personnel.
CAUTION
Coat all rivet nuts with sealing compound
prior to installation. Failure to comply may
result in damage to equipment.
(28) Apply sealing compound to 12 blind rivet nuts (24).
(29) Install 12 blind rivet nuts (24) in van body floor (2).
16-258


Back to Top