TM-9-2320-365-20-4

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-4 - Page 525 of 968

TM 9-2320-365-20-4

(6) Perform steps (2) through (5) on remaining wires.

NOTE

Steps (7) and (8) require the aid of an

assistant.

(7) Install gasket (1) and 12/24 vdc power entry connector

J173 (2) in 12/24 vdc power entry panel (6) with three

screws (7), lockwashers (8), and nuts (9).

(8) Install dust cap (10) on 12/24 vdc power entry connector

J173 (2) with screw (11), lockwasher (12), and nut (13).

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(9) Apply sealing compound on edges of 12/24 vdc power

entry connector J173 (2).

(10) Install dust cap (10) on 12/24 vdc power entry connector

J173 (2).

NOTE

Perform step (11) on van bodies serial

number 191 and higher.

(11) Install cover (14) on 12/24 vdc power entry panel (6) with

four washers (15), lockwashers (16), and screws (17).

16-477