TM-9-2320-365-34-1
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-1 - Page 1122 of 1334
TM 9-2320-365-34-1
D-4. CAB MAINTENANCE STAND (CONT)
Figure D-7. Cab Maintenance Stand Brace Bracket Locations
h. Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (9.6 mm) holes through 4 support
braces (4) and through 2 supports (6) as shown in
Figure D-7.
Cab Maintenance Stand Brace Bracket
Locations
.
i.
Make 2 B braces by securing to each end of support (6), braces (4) and straight brackets (10) using 16 bolts
(11), flat washers (13), lockwashers (14), and hex nuts (15).
j.
Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (9.6 mm) holes through 2 support
braces (5) and through 1 support (6) as shown in
Figure D-7.
Cab Maintenance Stand Brace Bracket
Locations
.
k. Make C brace by securing to each end of support (6), brace (5) and straight brackets (10) using 8 bolts (11), flat
washers (13), lockwashers (14), and hex nuts (15).
D-12
D-12
Back to Top
